|
|
NAVIGAT X MK 1
Standard features
- Comprises one single unit
- Control and display unit in front cover with 4-digit heading display an
- 6 operating keys
- Easy to install and easy to service
- High-speed follow-up system 100°/sec.
- Rate of turn output
- Automatic static north speed error correction
- Integrated TMC interface
- Compass monitor function
- Highly accurate digital heading data transmission by shaft encoder
- Self-synchronizing repeater compasses
- +/- 180° Alignment error correction in setup program
- Will drive a maximum of 12 analogue repeaters
- 7 independent serial out-puts RS 422 & NMEA 0183
- 2 independent 6 step/o heading outputs (0.5 A)
- Complies with IMO regulations A.424 (IX), A.574 (14), A.821(19) -
HSC
- (High-Speed Craft) and ISO 8728
- Outputs to Voyage Data
Printer:
- Heading
- Heading source gyro/magnetic
- Rudder angles of two independent rudders
- Complies with DNV - W 1
- Insensitive to horizontal acceleration
- Twin rotors and liquid damping system eliminates latitude error
- High MTBF (mean time between failures) and low power
consumption
- All repeater compasses with serial interface
- Automatic emergency power changeover and status alarm
- Gyro system remains north stabilized during power interruptions of
up to 3 minutes
- Single point suspension of the gyroshere container elimnates the
well-known adverse effects associated with gimbals
- Monitoring and alarm functions for all voltages, gyroscope current
and follow-up system
Optional features
- Automatic dynamic north speed error correction
- Voyage Data Printer
- Conventional, adaptive and high-speed code autopilots
- Remote control unit
- Compass Monitor for additional operational convenience
- Rudder angle feedback units
- Electromagnetic speed log
- Electronic compass with NMEA 0183 interface
- Magnetic compass with flux-gate
- Inputs an Outputs for all Basic Systems
- Analogue and digital repeaters
|
|
|
Standard 20
Gyro Compass IMO
Performance
characteristics/Main
features
- Highest heading accuracy +/- 0.1°
- Self-adjusting, serial heading transmission system
- Absolute digital heading data transmission
- Repeater synchronization device no longer necessary
- No desynchronization through interruption, change-over or power
failure
- Self-aligning suspension (no cardanic error)
- Static and dynamic speed error correction
- Makes it possible to reduce the system-related compass
error, which must not exceed +/- 3° to +/- 0.4°
- Full GMDSS suitability
- Specially designed for fast ships (70 kn)
- High rate of follow-up (75°/sec.)
- Sensor with extremely high shock- and vibration resistance
- Variable output interfaces, serial, analogue, step
- built-in test equipment/ operation data output for service
- Combined analogue/digital display on repeaters
- Can be fully incorporated into Integrated Navigation Systems
- MTBF (mean time between failure) 40,000 h for the gyrosphere
- Maintenance interval 3 years
- Fulfills IEC 945, IMO Res. A 424 (XI)
- BSH type-approved No. BSH/46/34G/95, as well as other
international certificates
- no manual compass alignment necessary, because of electronic "A"
(installation)-error compensation
|
